An dedicated alternative to High Pressure Compressor, DETER High pressure Gas Boosters are compact , require no electrical or mechanical drives connections, are powered by the same air that they amplify, and can be mounted in any position.
The small end of the cycling spool uses a permanent air spring, This unbalanced cycling spool ensures that the air amplifier cycles on demand.
The ratio of the areas between the Connected pistons is called the Area Ratio and is the dash number used in all model codes. This ratio and the pressure of the air drive source determine the maximum outlet pressure of the Gas Booster.
Unique DETER seal technology enables the drive section of its pressure generating products to operate uikthout air Line Lubrication.



Key Features 
●Infinitely Variable outlet pressure and flow capability.
●No heat, flame, or spark risk
●No air line Lubrication reguired eliminating oily exhaust.
●Long seal life and easily maintained
●Wide range of models,controls and options.
●Wide standard product range, complete custom-made system.



General Description
An High pressure Gas Booster is an air pump that is driven by part of the incoming compressed air supply enabling it to cycle and pump the unbalance of the supply to a higher output pressure.
Pressure is generated by use of the differential area pistonassembly. Low air pressure applied to a large area cretes high pressure air on the small area. Cycling is achieved through the use of two pilot valves that alternately pilot vale, and the larger area end of the cycling spool.